HEPA Filter Pass Box VIETPHAT
Installing a HEPA filter pass box, especially from a brand like VIETPHAT, involves additional steps to ensure the HEPA filter's proper integration and functionality within the cleanroom environment. Here’s a detailed guide to assist you:
Steps for Installing a HEPA Filter Pass Box
1. Planning and Preparation
- Determine Location: Identify the exact location for the pass box installation, ensuring it is suitable for both the cleanroom and adjoining space.
- Dimensions Check: Confirm the dimensions of the pass box and the wall opening.
- Tools and Materials: Gather necessary tools and materials such as screws, sealant, level, drill, and any other required installation hardware. Ensure you have a HEPA filter integrity testing kit.
2. Cut the Opening
- Mark the Area: Mark the area on the wall where the opening will be made based on the dimensions of the pass box.
- Cut the Wall: Carefully cut the wall at the marked area to create the opening for the pass box. Ensure the edges are smooth and clean.
3. Install the Pass Box Frame
- Position the Frame: Place the pass box frame into the wall opening. Ensure it is level and properly aligned.
- Secure the Frame: Use screws and appropriate hardware to secure the frame to the wall. Confirm the frame is firmly attached.
4. Install the HEPA Filter
- Inspect the HEPA Filter: Check the HEPA filter for any damages before installation.
- Position the Filter: Place the HEPA filter in its designated position within the pass box, ensuring a snug fit.
- Secure the Filter: Use the provided clamps or brackets to secure the HEPA filter within the pass box. Ensure it is firmly attached without any gaps.
5. Sealing and Insulation
- Apply Sealant: Apply a sealant around the edges of the pass box frame and HEPA filter to prevent any air leaks. This is critical to maintaining cleanroom integrity.
- Insulation: Depending on the cleanroom standards, add insulation around the pass box as needed.
6. Install the Pass Box Unit
- Fit the Unit: Insert the pass box unit into the secured frame, ensuring it fits properly.
- Secure the Unit: Fasten the pass box unit to the frame using screws and brackets. Ensure all components are tightly fastened.
7. Electrical Connections (if applicable)
- Power Supply: Connect the power supply for any electronic components like UV lights or intercom systems according to the manufacturer's instructions.
- Testing: Test all electrical components to ensure they are functioning correctly.
8. HEPA Filter Testing
- Integrity Test: Perform an integrity test on the HEPA filter using a particle counter or other suitable device to ensure it is functioning correctly and meeting cleanroom standards.
- Airflow Test: Verify that the airflow through the HEPA filter meets the required specifications.
9. Final Checks and Adjustments
- Check Doors: Ensure that the pass box doors open and close smoothly and that the interlocking mechanism works correctly.
- Level and Alignment: Double-check the level and alignment of the pass box, making any necessary adjustments.
10. Clean Up
- Remove Debris: Clean up any debris or dust generated during the installation process.
- Inspect and Clean: Thoroughly inspect the pass box and surrounding area to ensure everything is clean and free of contaminants.
11. Documentation and Compliance
- Document the Installation: Record the installation process, including measurements, tools used, and any deviations from the plan.
- Compliance Check: Ensure that the installation meets all relevant cleanroom standards and regulations, including proper documentation for quality control purposes.
By following these detailed steps, you can ensure a proper and efficient installation of a VIETPHAT HEPA filter pass box. Always refer to the manufacturer’s specific installation guide for any additional requirements or recommendations
---------------------------
Thông tin liên hệ:
Zalo: 0971.344.344
Nhân viên phục vụ 24/7: 0827 077 078
Nhân viên phục vụ 24/7: 0829 077 078
Tổng đài 24/7: 0971 344 344
Yêu cầu báo giá: sales@vietphat.com
Website: www.vietphat.com
Giao hàng tận nơi
CÁC DÒNG SẢN PHẨM CÔNG TY CỔ PHẦN KỸ THUẬT VIỆT PHÁT ĐANG CUNG CẤP:
- Lọc cuộn: G1, G2, G3, G4, M5
- Lọc thô dạng tấm: G1, G2, G3, G4
- Lọc thô dạng túi: G1, G2, G3, G4
- Lọc tinh dạng tấm: M5, M6, F7, F8, F9
- Lọc tinh dạng túi: M5, M6, F7, F8, F9
- Lọc EPA: E10, E11
- Lọc HEPA/ULPA: H13, H14, U15, U16, U17
- Lọc phòng gió vào, gió ra phòng sơn
- Lọc chịu nhiệt độ cao: G1, G2, G3, G4, M5, M6, F7, F8, F9, E10, E11, H13, H14, U15, U16, U17
- Hộp chứa lọc: G1, G2, G3, G4, M5, M6, F7, F8, F9, E10, E11, H13, H14, U15, U16, U17
- Hộp kết nối AHU: G1, G2, G3, G4, M5, M6, F7, F8, F9, E10, E11, H13, H14, U15, U16, U17
- Hộp lọc khí FFU/Fan Filter Unit (FFU): H13, H14, U15, U16, U17
- Bộ hộp lọc chảy tầng cho phòng mỗ bệnh viện: H13, H14, U15, U16, U17
- Buồng thổi khí/Air Shower, buồng trung chuyển/Pass Box, phòng sạch di động/clean booth
- Lọc cuộn carbon, lọc thô carbon, lọc tinh carbon, hạt lọc carbon
- Lọc dầu mỡ, lọc nhôm khung nhôm, lọc sương, máy lọc tĩnh điện
- Miệng gió, ống gió, van gió, phụ kiện van gió, hộp điều chỉnh lưu lượng gió-VAV Box, CAV Box, cầu chì van chặn lửa
- Ống nhôm nhún, ống mềm cách nhiệt, silicone chống cháy, simily quấn ống, đinh nhôm, đinh nhựa, vải thủy tinh, ke ống gió, ron ống gió, gối đỡ foam pu
- Vải thẩm thấu Ductsox, van Tozen, thiết bị khử khuẩn không khí Jonix, cảm biến khói Apollo, thiết bị đo Dwyer, chiller giải nhiệt Aermec, quạt lưu lượng cao tốc độ thấp BladeTec, thiết bị chống rung và kiểm soát độ ồn Mason
#HEPA Filter Pass Box VIETPHATHEPA Filter Pass Box VIETPHATHEPA Filter Pass Box VIETPHATHEPA Filter Pass Box VIETPHAT
